The 2022 Poco M4 series is a great budget-friendly device. It delivers a punch without burning a hole in your pockets. The Poco M4 series devices have a decent design and a mind-blowing spec sheet. However, with great power comes even greater heat. For some reason, the M4 series seems to be overheating. This is a serious issue as overheating not only causes thermal throttling but can also permanently damage the device. So let’s look at some of the things you can do to fix this issue. Here’s how to fix Poco M4 overheating, and fix Poco M4 Pro overheating. This troubleshooting guide can also fix Poco M4 Pro 5G overheating.
About Poco M4 Series
The affordable Poco range from Xiaomi rarely requires an introduction. Due to their fantastic value proposition, numerous models in the series have been enjoying tremendous success. The Poco M4 5G, the fourth generation of the Poco M series, is available right now. Poco’s current naming convention is a bit confusing, therefore some clarification is required. In the latest Poco M4 lineup, the Poco M4 5G seems to be marketed as the least expensive option. Due to its 6.58-inch 90Hz LCD panel, which is a similar size to that of the Poco M4 Pro 5G, it is probably more akin to that device than the Poco M4 Pro. The Poco M4 5G, however, is inferior to the M4 Pro 5G in virtually other respects.
Rather than the Dimensity 810 found within the Poco M4 Pro 5G, the MediaTek Dimensity 700 is featured in both the Poco M4 and M4 5G. It only offers 18W charging instead of 33W, seems to have a single speaker as opposed to a stereo configuration, lower-resolution main and selfie cameras, and is only rated IP52 rather than IP53. Also left out is the ultrawide camera. The M4 5G is undeniably noticeably inferior.
When talking about the Pro series, The Helio G96 chipset replaces the Dimensity 810 one in the 4G model. On the other hand, in addition to OLED’s other benefits, it receives a 6.43-inch OLED display, which is somewhat smaller than the 6.6-inch screen in the 5G, preserves the 90Hz refresh rate, and offers a lot more brightness. Light improvements can be noticed in the camera area as well; the main unit now employs a 64MP sensor instead of the 50MP one found in the 5G version, and a 2MP macro lens has emerged where none previously existed. The selfie camera and the ultrawide on the rear are still present. The 33W charging speed, which is now a standard feature of the Xiaomi series, as well as the 5,000mAh battery capacity are both carried over to the Poco M4 Pro. A headphone connection, a dedicated MicroSD slot, and other traditional goodies round out the feature list.
How to Fix Poco M4 Pro Overheating
Smartphones may have device overheating problems as a result of hardware compatibility difficulties and clashes with third-party apps. Direct sunlight exposure, overnight charging, streaming multimedia, playing online games, etc., can occasionally cause battery drain or overheating. There are additional things like online video calls, content uploading or downloading, demanding background chores, etc. Let’s look at the solutions to fix Poco M4 Pro overheating.
Force Reboot Device
Simply forcing a restart of your device is the first step you must always do to allow the system bug or cache data to be fully refreshed. Force reboots are a little different than regular reboots, and in some situations, they might be useful for resolving short-term problems or glitches.
- Press and hold the Power button and Volume Down button for a few seconds.
- Wait for the screen to go dark and then let go of the buttons after you feel a vibration.
- Let the device reboot.
Check Software Updates
In certain circumstances, downloading and installing the most recent software update for your device will resolve a variety of problems. A fresh software update always includes a ton of improvements and useful new features.
- Go to Settings > About Phone.
- Tap on the MIUI version.
- Download and install the update.
Change Refresh Rate
It’s also worthwhile to consider changing the device’s display refresh rate to see if the overheating problem persists or not. Higher refresh rates can occasionally lead to battery draining as well as overheating problems. It’s advisable to set it to the default 60Hz because the majority of people don’t utilize this option or don’t recognize the differences in a variety of settings.
- Open Settings and navigate to Display Settings.
- Tap on Refresh Rate.
- Change the refresh rate to 60Hz.
- Reboot your device.
Force Stop Apps
Sometimes after you’re done playing games, the game may run in the background and continue using the device’s resources. This can cause the device to overheat. Make sure to terminate any applications that are currently operating on your device and using resources in the background. Depending on the situation, forcing the apps to stop could prevent overheating problems to some degree unless there is a problem with the battery or the operating system.
- Open Settings and go to Apps.
- Force close any running apps, especially games.
- While you’re at it, tap on the 3-dot menu and select Show System Apps.
- Stop any unwanted system apps.
Avoid Keeping your Device in Sunlight
Make sure not to expose your Poco M4 and M4 Pro 5G to direct sunlight for an extended period of time as this could cause your device to overheat more quickly and shorten the battery life. In the event that your device overheats from exposure to sunlight, hold it there for a few minutes so that it can return to normal operating temperature. Avoid keeping your device in the sunlight especially if you’re charging. This could not only overheat the device but might also cause permanent damage.
Boot to Safe Mode
Booting into safe mode allows you to know if any 3rd party app is causing this issue. If your device doesn’t run hot when in safe mode, then a 3rd party app that you’ve recently installed is the culprit. That app is using valuable resources even when it is not supposed to.
- Press and hold the Power
- Press and hold the Power Off icon on the power menu.
- Tap Ok when you see the “reboot to safe mode” prompt.
Factory Reset
Use this as the last resort. The system’s problems or conflicts can sometimes be resolved by performing a factory reset. But if you choose the factory reset approach, everything on your phone will be erased. So, before performing the actions listed below, you can create a backup.
- Open Settings.
- Go to About Phone.
- Tap on Factory Reset and then select Erase All Data.
- Confirm the action and then wait.
How to Fix Android 13 VPN Not Working? How to Fix Android 13 Delayed Notifications?
