As long as you’re on a stable version of the OS, your Samsung Galaxy S10 should not have any problem booting. But you never know when an error will strike. If you are having a problem booting your Galaxy S10 or if the phone is stuck at the boot logo, this troubleshooting guide is for you. Here’s how to fix Samsung Galaxy S10 stuck at boot logo.

Before we begin, let’s talk about the most probable cause for this problem – interrupting update midway. Never interrupt an ongoing update. To make sure you don’t face this problem, always initiate an update only when the phone has at least 50% battery left and do not switch off or restart the phone when it is updating. Have patience. Below are the troubleshooting steps to fix Samsung Galaxy S10 stuck at boot logo.

amsung Galaxy S10 stuck at boot logo

Force Reboot: The first thing you can do is force reboot your Galaxy S10. This is similar to removing the battery and putting it back again. Since you cannot physically remove the battery, this is the closest thing you can do to imitate that.

amsung Galaxy S10 stuck at boot logo

To perform a forced reboot;

  1. Press and hold the Power button.
  2. Without releasing the Power button, press and hold the Volume Down button.
  3. Hold on to the buttons for at least 10 seconds.

Clear System Cache: If a forced reboot didn’t do any good, clearing the system cache might. Doing this may remove any bugs in the system that may be causing the issue. To perform a system cache clean up, you need to get into recovery mode.

 

amsung Galaxy S10 stuck at boot logo

To get into Recovery mode and clear system cache, follow the steps below;

  1. Turn the device off. Since it is stuck at the boot logo, you cannot do that in a conventional way. Follow the steps of how to perform a forced restart on the previous step.
  2. After it is shut down, press and hold the Volume Up button and the Bixby button at the same time. Do not let go of the buttons.
  3. Press and hold the Power button. Wait till the Recovery menu appears.
  4. Use the volume keys to navigate and the power button to select.
  5. Select and perform ‘wipe cache partition’.

If this doesn’t work, follow the same steps but instead of selecting ‘wipe cache partition’, select ‘wipe data/factory reset’. If the troubleshooting guide didn’t help, you should take it for repair.

Also Read:

RELATED ARTICLESMORE FROM AUTHOR

LEAVE A REPLY

Please enter your comment!
Please enter your name here