Sometimes accident may occur and one of the most horrific experiences is to have a phone or laptop drop in water or get wet in the rain. Water damage is always dangerous for your device whether it is a splash of drink, a splash in the rain or just a splash in a wrong place. However, don’t panic! Most of the time it is not too late and performing the correct research and procedure can prevent the phone or laptop from being damaged beyond repair. In this guide, you’ll get to know the key steps you need to undertake in case your device got wet and, therefore, avoid compromising its chances of booting again.
For Phones:
1. Switch Off Your Phone the Moment
Regulatory measures you might want to take are firstly, you should turn off your phone. Switching it off reduces the chance of a short circuit that can completely destroy the inside of the computer.
2. Remove Accessories
Remove any protective cover, detach the charging pins or headsets. This makes your phone cool and free from moist since it gets the chance to breathe properly.
3. Dry the Exterior
Closely rub it with a soft, lint-free material to remove any water that you see on its surface. Avoid rubbing into the device more moisture especially on the screen and part where the charger plugs in.
4. You have to pull out the SIM and the Memory Cards
If your phone has removable SIM or memories then remove them. This would lead in damaging the cards and or having them get spoiled hence the need to let them to dry separately.
5.Dry with Silica Gel or Rice in a pinch.
If you own silica gel packets; put your phone in a bag/-container with these packets. When it comes to absorbing moisture silica gel is the best compound that can be used.
If you cannot find silica gel, then you can replace the gel with uncooked rice. However, as compared to bread it is less effective since it has the ability to absorb moisture. Well, you just have to put the phone in rice and let it sit for a day or two or better yet 48 hours.
6. Avoid Direct Heat
Avoid using a hairdryer, oven or any other heat appliance as a way of drying out your phone. It if is held at higher temperatures then it is likely to further damage the phone. That is preferred over washing it with water and then patting it with a cloth to dry because the cloth may leave marks on it.
7. Check Your Phone
For the next 24-48 hours, take out your phone. Power it on and attempt to test some features that include, touch, sound and display among others. Just in case, if it doesn’t turn on, then it might need a professional technician to handle it.
8. Consider Professional Help
If the phone doesn’t work after drying or if there seems to be internal damages, the advice to seek the services of a technician applies.
For Laptops:
1. Power Off Immediately
By the same analogy to phones, the first thing to do with a laptop is to power it off. If your laptop takes a while to respond, press the power button for a while then turn it off.
2. Disconnect Accessories
If possible detach peripherals such as a mouse, external hard drive, USB, and the power cord. This makes certain that even the water will not interfere with these items or their ports in any way.
3. Dry the Exterior
In the case of water spilling on the laptop most of the water will evaporate, you should however wipe all the water from the surface of the laptop using a piece of cloth that is soft. Use a gentle touch because you don’t want to add pressure that forces moisture into the device.
4. Turn the Laptop Upside Down
Lay your laptop flat on a table then turn it upside down especially to allow for the draining of water that may have penetrated through the keyboard and other ports. Alow it to remain in this position for a few of minutes.
5. Open the Laptop (If Safe)
If you’re at ease to disturb them and it is safe to do then you should open the laptop so that the fans will circulate air to help any drying taking place. If you can’t document this in a neat manner or are not sure how to do it, you can certainly omit this step as well.
6. Dry with Silica Gel or Rice
Similarly, the best that anyone with a laptop that has been affected by water can do is put it in a bag or any container and place the silica gel near it. If you don’t have silica gel then using uncooked rice can also be effective in preventing the absorption of the moisture. Keep it in the drying material for at least 1-2 days.
7. Avoid Heat
Do not use hairdryer or any heated device to try and dry your laptop. When one heats up the equipment, internal parts are also affected thus become damaged. Allow laptop to dry at room temperature Don’t apply pressure on laptop’s screen Now you can let the laptop air-dry.
8. Check Your Laptop
After two days, try to look into your laptop. Just switch it on and see whether the display, the keypad and other controls will work or not. Alternatively, if it does not work or seem wrong in any way, it shall need professional repairing.
Additional Tips:
Be Patient: You cannot expose the device to a new batch of humidity as soon as you dry it up; therefore, you should wait until the device is dry before applying power.
Seek Professional Help: If you have questions about how to take apart your device or it doesn’t work after drying it is recommended to seek professional help and check if your device needs repair.
Conclusion:
For instance, Phone or laptop can get wet but this can be saved if acted as soon as possible. Always keep in mind that the early you act, the more likely it will be to recover. If you are using silica gel, rice or if you are looking to seek professional help then the above mentioned steps would make sure that any further damage is kept to a minimum that could lead to further damage of your device. In the event further steps must be taken to safeguard this computer just stay put and act!
You can also read:
https://appslova.com/i-got-my-phone-wet-now-what/
